Details

 

SPED has not had any increases in the past 11 years. Reflecting on improvements in the courses and increased costs our new pricing will come into effect on November 07, 2019.

 

All current quotations will be honored until this date, provided payment is received.

 

PBC & PPL courses will go up to $9000.00 for the purchase of both courses.

 

 

Please see SPED_PBC_and_PPL_course_price_increase-November_07_2019.pdf for current price list.

 

 

Comment (0)

Details

 

Albert C. Worth

APRIL 12, 1947 ~ JUNE 15, 2019 (AGE 72)

For those who do not already know, Al Worth passed away. Al was a long time SPED member, PPD Level IV Piper and former SPED Director. On the board, Al was particularly interested in the continuing development of the Professional Piping Design (PPD) certification program. Al was instrumental in developing SPED’s RP-001, Recommended Practice for Assessing Piping Designer Baseline Skills and Competencies. He was one of the founding members of SPED’s PPD Advisory Committee (PPDAC).

 

Al will be sorely missed,

 

Bill Beazley

William G Beazley, PhD, PE

Executive Director

Details

 

Design Quality Improvement – Bulletin 03 4/29/19 Prepared by – Todd Sisti, PE

 

Orifice Plate Flow Meter Piping Requirements

 

Quality Concern:

 

Improper installation of Orifice Plate Flow Meters will cause errors in flow readings.

 

This document is written to address Orifice Plate type flow meter piping. There are numerous types of flow meters that all have different requirements for piping installation. The designer should always consult the Instrument Engineer or Manufactures literature on final installation requirements for any Flow Meter. With that being said; there are still some practical design applications within this document that could apply to many flow meter types.

 

Comment (1)

Details

 

Design Quality Improvement – Bulletin 02 4/29/19 Prepared by – Todd Sisti, PE

 

Design of Pipe Expansion Loops

 

 

Quality Concern:

 

What is the practical range of axial pipe line growth that a designer should plan for in the design of an expansion loop?

 

  • In Case 1 below the expansion loop is absorbing up to 20” (10” per side) of pipe line growth without a resulting pipe stress problem.

  • In Case 2 multiple expansion loops are designed which absorb only 1” to 2” of axial line growth.

 

Comment (0)

Details

 

Design Quality Improvement – Bulletin 01 4/29/19 Prepared by – Todd Sisti, PE

 

AUXILIARY PIPE SUPPORTS – CONSIDER THE COST ($)

 

Quality Concern:

 

Auxiliary Supports are sometimes referred to as Engineered Supports, or Special Supports. Regardless of what you call them, these supports are custom designed for a specific application. Sometimes they are used as a gang support to support many lines, and other times they are custom to support a special pipe stress need. Regardless of the need, the support designer should consider the cost of the design of the support and plan for economics in design.

 

Comment (0)

Details

 

 

Some news of recent SPED events in Madrid from our Spain Chapter

 

Comment (0)